| 步骤１： |
把处理好的衣物平放在压缩袋内，双手将左右两边手把向外拉平
Put clothing in the bag throught the bag opening.Pull
the two sides so that the openings will stick
together automatically.Repeat several time
until wrinkles are minimized.
|
| |
|
 |
|
| 步骤２： |
以毛巾将蓝色封口部分轻轻抹平，直到封口贴合无缝隙。
Remove tke wrinkles by rubbing with a cloth.Openings
must be flattened completely and leave
no wrinkles which may cause air leakage.Repeat
the steps again if leakage found. |
| |
|
 |
|
| 步骤３： |
先将吸尘器管口套入纲套（附件）中，再将套好纲套的吸尘器管口插入尾部吸/排气管中，接触到衣物的位置，将空气抽出直到完成压缩状态。（附注2）
Insert the hose of the vacuum clearer into
the mesh bag before putting into the
vacuum storage bag to evacutate the air. |
| |
|
 |
|
| 步骤４： |
达到压缩状态后，先将吸尘器套管抽出，再将纲套抽出。
When the air is evacuated completely,take
out the hose first then the mesh bag
one by one.
|
| |
|
 |
|
| 步骤４： |
最后再以小方巾将吸/排气口抹平，完成整个压缩过程。
Latten openings and remove air bubbles
bay rubbing with a cloth.
|
| |
|
 |
|
